PRODUCT INFO

Two Post Lifts

   
Two Post Lifts
     
9,000 lb. Two Post Asymmetric Lift  


:click image to enlarge:

Model Number: TP9KAC

  

Documents: Literature , Manual

  
  • 9,000 lb lifting capacity
  • Asymmetric design
  • Dual cylinders with low friction chain rollers
  • Low profile automatic arm restraints
  • Stackable drop-in height adapters
  • Free mounting hardware
  • Powder-coated paint finish
  • Electric override automatic safety shut-off
Specifications
Model Number TP9KAC
Capacity 9,000 lbs
Lifting speed 50 seconds
Motor rating 2HP 220V 20A
Width overall 134"
Height overall 142"
Lifting height 70.5"
Lifting height (with ext.) 75.5"
low pad height 4.5"
Width between columns 109"
Drive thru 92"
Shipping weight 1500 lbs
     
9,000 lb. Two Post Symmetric Lift  


:click image to enlarge:

Model Number: TP9KF

  

Documents: Literature, Manual
Specifications
Model Number TP9KF
Capacity 9,000 lbs
Lifting speed 50 seconds
Motor rating 2HP 220V 20A
Width overall 134"
Height overall 111.5"
Drive thru width 92"
Raised height(no ext.) 70.5"
Raised height(with ext.) 75.5"
Low height 4.5"
Shipping weight 1500 lbs

  • 9,000 lifting capacity

  • Symmetric design

  • Dual cylinders with low friction chain rollers

  • Low profile automatic arm restraints

  • Stackable drop-in height adapters

  • Free mounting hardware

  • Powder-coated paint finish
       
Direct Drive 9,000lb capacity two post lift  


:click image to enlarge:

Model Number: TP9KAC-N

  

Documents: Literature

Specifications

Model Number

TP9KAC-N

Capacity

9,000lbs

Overall Height

143.5"

Overall Width

126"

Drive thru clearance

99"

Space between columns

108"

Lifting height

67.5"

Lifting height with dapters

77.5"

Lowered height

3 3/4"

Lifting speed

50 sec

Shipping weight

1,450 lbs

  • Dual cylinder direct pull lifting. No chains or roller bearings to wear out.

  • Single piece column. Continuous rolled steel column.No sheet metal.
  • Extra long carriage (44"). Puts less stress on slider blocks
  • Padded cut-off bar. Automatic electric override.
  • single point, solenoid control, safety release system
  • Free hardware.
  • Spin-up pads with stackable truck adapters standard.
  • Powder coat paint finish.
     
Forward 9000lbs. two post lift    
  Model Number: BP9  


:click image to enlarge:
  • 9,000 lbs. capacity lift for facilities with low ceilings
  • Dual hydraulic cylinders
  • Carriage latch system - engages every 3"
  • Secondary lock system includes a spring actuated slack chain locking device
  • Truck adapters included
  • Powder coat, oven baked finish
Specifications  
Model BP9
Capacity 9,000 lbs. (4082kg)
Rise w/ Extensions 80-1/2" (2045mm)
Rise w/o Extensions 72" (1829mm)
Overall Height 111-1/4" (2826mm)
Overall Width 138-1/2" (3518mm)
Drive Through Clearance 97-1/4" (2470mm)
Width Inside Columns 111" (2819mm)
Arm Reach (Min./Max.) 30"/46-1/4" (762mm/1175mm)
Min. Adapter Height 3-1/2" (89mm)
Drive-Over Height 1-1/2" (38mm)
Voltage/Amps 208/230, 20 Amps
Motor/Phase 2 HP/1Ø* (38mm)
Min. Ceiling Height 113" (2870mm)
   
10,000lb. Capacity asymmetric lift ETL/ALI certified  


:click image to enlarge: 

Model Number: TP10KAC-D

  

Documents: Literature, Manual 

  
  • ETL/ALI certified
  • Dual cylinder direct pull lifting. No chains or roller bearings to wear out.
  • Single piece column. Continuous rolled steel column. No sheet metal.
  • Extra long carriage (44"). Puts less stress on slider blocks
  • Padded cut-off bar. Automatic electric override.
  • Two point lock release.
  • Free hardware.
  • Stackable truck adapters standard.
  • Powder coat paint finish.
Specifications
Model Number TP10KAC-D
Capacity 10,000lbs
Overall Height 141.5"
Overall Width 137.25"
Drive thru clearance 95.75"
Lifting height 71.5"
Lifting height(with ext.) 80.25"
Lowered height 4"
Lifting speed 50 sec
Shipping weight 1,605 lbs
     

Forward 10,000 lbs. capacity Two Post Lift

  
  Model Number: I10  


:click image to enlarge: 
  • 10,000 lbs. capacity for raising most passenger cars, trucks and vans.
  • The I10 has been third party tested by ETL and approved by ALI.
  • Hydraulic cylinders in each column:
    • Direct pull lifting technology
    • Top mounted
    • Full stroke
    • Cylinder rod concealed inside carriage
  • Overhead cable equalization.
  • Dual point release lock in each column, resets on upstroke.
  • Large rubber-padded swivel adapters wtih extra height extensions are standard.
  • Spring operated arm restraints, disengage at floor level.
  • Padded overhead height limit switch bar.
  • Spot-Rite arm design enables you to position doors in front of column or behind, to avoid door damage.
  • Durable powder coat finish - standard color of lift is blue with yellow arms. Red lift with yellow arms is available.
Specifications I10
Model I10
Capacity 10,000 lbs. (4536kg)
Overall Height 143-1/8" (3635mm)
Height to Shut-Off 136-1/4" (3461mm)
Minimum Ceiling Height 144" (3658mm)
Minimum Lifting Height 3-5/8" (93mm)
Maximum Lifting Height 77" (1956mm)
Overall Floor Width 133" (3378mm)
Inside Column Width 111-3/4" (2838mm)
Drive Through 99-1/8" (2581mm)
Adapter Heights 0", 1-1/2" (38mm),
3" (76mm),
6" (152mm)
Voltage 220v
Amps 20
Motor 2HP
 
 
 
 
     
11,000 lb capacity Direct Drive Asymmetric Lift  


:click image to enlarge: 

Model Number: TP11KAC-D

  

Documents: Literature , Manual 

  
  • Dual cylinder direct pull lifting. No chains or roller bearings to wear out.
  • Single piece column. Continuous rolled steel column.No sheet metal.
  • Extra long carriage (44"). Puts less stress on slider blocks
  • Padded cut-off bar. Automatic electric override.
  • Two point lock release.
  • Free hardware.
  • Stackable truck adapters standard.
  • Powder coat paint finish.
Specifications
Model Number TP11KAC-D
Capacity 11,000lbs
Overall Height 141.5"
Overall Width 137.25"
Drive thru clearance 95.75"
Lifting height 71.5"
Lifting height(with ext.) 80.25"
Lowered height 4"
Lifting speed 50 sec
Shipping weight 1,605 lbs
     
11,000 lb. Two Post Asymmetric Lift  


:click image to enlarge:

Model Number: TP11KAC
Specifications
Model Number TP11KAC
Capacity 11,000 lbs
Lifting speed 50 seconds
Motor rating 2HP 220V 20A
Lifting height 70.25"
with adapters 76"
Low pad height 4.5"
Width overall 137"
Width between columns 110.5"
Drive thru 90.5"
Height overall 141" or 145.5"
Shipping weight 1950 lbs

Documents: Literature, Manual
  • Dual cylinders with low friction chain rollers
  • Automatic arm restraints
  • Electric override. Auto safety shut-off
  • Powder coated paint finish
     
Heavy-Duty 12,000lb. Capacity Two Post Lift  


:click image to enlarge:

Model Number: TP12KF

  

Documents: Literature

  
  • Dual 3" cylinders with low friction chain rollers
  • "Big Foot" base plates for extra stability
  • Low profile arm restraints
  • Durable powder coat paint finish
  • Free hardware
  • Powder coat paint finish
Specifications
Model Number TP12KF
Capacity 12,000 lbs
Lifting speed 60 sec
Power Pack 2hp 220vac
Lifting height 80.5"
with adapters 87"
Low pad height 9"
Height overall 122"
Width overall 150"
Width between columns 121.5"
Drive through 108"
Weight 2474lbs
     
Heavy Duty 15K Two Post Lift  


:click image to enlarge: 

 Model Number: TP15KC-K  

Documents: Literature

  
  • Dual 3" cylinders with low friction chain rollers
  • "Big Foot" base plates for extra stability
  • Automatic electric override
  • Free hardware
  • Powder coat paint finish

Specifications
Model Number TP15KC-K
Capacity 15,000 lbs
Lifting speed 60 sec
Power Pack 2hp 220vac
Lifting height 80.5"
with adapters 87"
Low pad height 9"
Height overall 180"
Width overall 150"
Width between columns 121.5"
Drive through 108"
Weight 2474lbs